The Main Use Of Combination Screws Design Combination Screws

Mar 09, 2022 Leave a message

Generally speaking, combination screws are widely used in electrical, electric, mechanical, electronic, household appliances, furniture, ships and so on. But the above said that different combination screws have different functions. For example, Phillips pan head combination screws are generally used in small electronic products. The larger cross hexagon combination screws are used in larger electrical products, such as frequency converters, and many large cross hexagon combination screws are used on some large frequency converters. Hit the inverter case. To loosen the tightening effect. For example, two combination screws with flower teeth, which are used on the inverter, are used to break the paint, so that all the two combination screws on the surface of the casing are energized. There is also a two-combination screw with a square pressure line, which itself is a two-combination screw with a pan head screw and a square pad. It is generally used on terminal blocks. The function is for wiring and for crimping.

The reason why the thread in the combination screw can't pass through the stop gauge may be the problem of the screw wire, or the screw wire is too large, or the screw wire is too small, or it is the quality of the screw wire material. The amount of raw material of the screw thread is not good, and the teeth that are rubbed out will definitely not be good enough to pass the pass-stop rule. Another reason is that pickling screws, two layers of electroplated screws are destroyed. As a result, the combined screw thread is damaged and cannot pass through the stop gauge. During the pickling process, the thread of the combination screw was washed away, and the washing was not full. Make the thread smaller. When the combination screw is electroplated, the thread diameter of the combination screw is plated too large or the plating layer is too thin, which will lead to the failure to pass the stop gauge.

Finally, there is another reason why the thread of the combination screw cannot pass the stop gauge. It is the collision between the combination screws, which leads to the deformation of the thread of the screw, and the thread is bumped, which may also lead to the failure to pass the stop gauge. Of course, there are many reasons why the combined screw thread cannot pass through the stop gauge. The above are just some of them. but the primary reason


Need Custom Fasteners & Garden Hardware Solutions?

ZIN Hardware provides high-quality fasteners and garden hardware with customized sizes, materials, finishes, packaging, and logo options.
Contact us today to build your customized hardware solution.

Send Inquiry